The FROMM P328 is a cordless, battery-powered strapping tool that tensions, friction-weld seals, and cuts PET and PP strap from 12 mm to 16 mm — in a single, one-handed cycle.
Engineered and built in Italy with a brushless motor, dial-adjustable tension and weld time, and full finger protection — so your operators strap more pallets per shift, with consistent, repeatable joint strength on every load.
2600 N
12–16 mm
~ 75%
585 lbs · adjustable from 250 N
PET & PP · 0.40–1.05 mm
Friction-weld seal*
Built like the datasheet reads.
Every figure below is taken directly from the FROMM P328 datasheet. If your application calls for something outside this envelope, our specialists will match you to the right tool in the FROMM range.
| Strap qualities | Polyester (PET) & Polypropylene (PP), plain and embossed |
|---|---|
| Strap width | 12.0 – 16.0 mm |
| Strap thickness | 0.40 – 1.05 mm / .016 – .041″ |
| Tension force | 250 – 2,600 N / 56 – 585 lbs (adjustable) |
| Tension speed | 67 – 124 mm/s / 2.6 – 4.9 in/s |
| Type of seal | Friction-weld sealing |
| Average seal strength | Approx. 75% (dependent on strap quality) |
| Power supply | Li-Ion battery, 18 VDC / 4.0 Ah · approx. 80 min charge |
| Weight incl. battery | 4.3 kg / 9.6 lbs |
| Dimensions | L351 × W134 × H143 mm / 13.8″ × 5.3″ × 5.6″ |
Advantages
- Tension force and weld time adjusted with simple knobs — turnable with a coin
- Available in semi-automatic and single-button automatic versions
- No tension rocker — easier removal from small package surfaces
- Improved plates and guides reduce effort to remove the tool from the strap
- Motor-temperature monitoring protects against overheating; optional cooling fan available
- Integrated cycle counter and battery-charge indicator
- Fully enclosed housing for finger protection; well-protected battery
- Optional accessories: suspension brackets (pivoted or fixed), wearing plate, full protection plate
